Home > Application Security, Information Security, Privacy, Web Applications > Pass the iOS Privacy Salt – Hashing Does NOT Guarantee Privacy.

Pass the iOS Privacy Salt – Hashing Does NOT Guarantee Privacy.

I am also the editor of the Neohapsis Labs blog. The following is reprinted with permission from

By Michael Pearce, Neohapsis & Neolabs

There has been a lot of concern and online chatter about iPhone/mobile applications and the private data that some send to various parties. Starting with the discovery of Path sending your entire address book to their servers, it has since also been revealed that other applications do the same thing. The other offenders include Facebook, Twitter, Instagram, Foursquare, Foodspotting, Yelp, and Gowalla. This corresponds nicely with some research I have been doing into device ID leakage on mobile devices, where I have seen the same leakages, excuses, and techniques applied and abused as those discussed around the address book leakages.

I have observed a few posts discussing the issues proposing solutions. These solutions range from requiring iOS to request permission for address book access (as it does for location) and advising developers to hash sensitive data that they send through and compare hashes server side.

The first idea is a very good one, I see few reasons a device geolocation is less sensitive than its address book. The second one as given by is only partial advice however, and if taken as it is given in Martin May’s post, or Matt Gemmel’s arguments;  it will not solve the privacy problems on its own. This is because 1. anonymised data isn’t anonymous, and 2. no matter what hashing algorithm you use, if the input material is sufficiently constrained you can compute, or precompute all possible values.

Martin May’s two characteristics of a hash [link] :

  • Identical inputs will yield the same hash
  • It is virtually impossible to deduce the original input from a hash if a strong hashing algorithm is used.

This is because, of these two characteristics of a hash the privacy implications of first are not fully discussed, and the second is incorrect as stated.

 Hashing will not solve the privacy concerns because:

  • Hashing Data does not Guarantee Privacy (When the same data is input)
  • Hashing Data does not Guarantee Secrecy (When the input values are constrained)

The reasons not discussed for this are centered on the fact that real world input is constrained, not infinite. Telephone numbers are an extreme case of this, as I will discuss later.

A quick primer on hashing

Hashing is a destructive, theoretically one-way process where some data is taken and put through an algorithm to produce some output that is a shadow of the input. Like a shadow, the same output is always produced by the same input, but not the other way around. (Same car, same shadow).

A very simple example of a hashing function is the modulus (or remainder). For instance the output from 3 mod 2 is the remainder when 3 is divided by 2, or 1. The percent sign is commonly used in programming languages to denote this operation, so similarly

                1 % 3 is 1,             2 % 3 is 2              3 % 3 is 0              4 % 3 is 1              5 % 3 is 2       etc

If you take some input, you get the same output every time from the same hashing function. The reason the hashing process is one way is because it intentionally discards some data about the original. This results in what are called collisions, and we can see some in our earlier example using mod 3, 1 and 4 give the same hash, as do 2 and 5. The example given will cause collisions approximately one time in 1, however modern strong hashing functions are a great deal more complex than modulo 3. Even the “very broken” MD5 has collisions occur only one time in every 2^24 or 1 in ~17 000 000.

A key point is that, with a hashing algorithm for any output there are theoretically an infinite number of inputs that can give it and thus it is a one-way, irreversible, process.

A second key point is that any input gives the same output every time. So, by checking if the hashes of two items are the same you can be pretty sure they are from the same source material.

Cooking Some Phone Number Hash(es)

(All calculations are approximate, if I’m not out by two orders of magnitude then…)

Phone numbers conform to a rather well known format, or set of formats. A modern GPU can run about 20 million hashes per second (2*10^7), or 1.7  trillion (1.7 *10 11) per day. So, how does this fit with possible phone numbers?

A pretty standard phone number is made up of 1-3 digits for a country code, 3 local code, and 7 numbers, with perhaps 4 for the extension.

So, we have the following range of numbers:

0000000000000-0000 to 9999999999999-0000

Or, 10^13 possible numbers… About 60 days work to compute all possible values (and a LOT of storage space…)

If we now represent it in a few other forms that may occur to programmers…

+001 (234) 567-8910, 0012345678910, 001-234-5678910, 0012345678910(US), 001(234)5678910

We have maybe 10-20 times that, or several year’s calculations…

But, real world phone numbers don’t fill all possible values. For instance, take a US phone number. It is also made up of the country code, 3 for the local code , and 7 numbers, with perhaps 4 for the extension. But:

  • The country code is known:
  • The area code is only about 35% used since only 350 values are in use
  • The 7 digit codes are not completely full (let’s guess 80%)
  • Most numbers do not use extensions (let’s say 5% use them

Now, we only have 350 * (10 000 000 *.8) * 1.05 or 2.94 billion combinations (2.94*10^9). That is only a little over two minutes on a modern GPU. Even allowing for different representations of numbers you could store that in a few of gigabytes of RAM for instant lookup, or recalculate every time and take longer. This is what is called a time space tradeoff, the space of the memory or the time to recalculate.

Anyway, the two takeaways for our discussion here regarding privacy are:

1. Every unique output value probably corresponds to a unique input value, so this hashing anonymisation still has privacy concerns.

Since possible phone numbers are significantly fewer than the collision chance of even a broken hashing algorithm there is probably little chance of collisions.

2. Phone numbers can be reverse computed from raw hashes alone

Because of the known constraints of input values It is possible to either brute force reverse values, or to build a reasonable sized rainbow table on a modern system.

Hashing Does NOT Guarantee Privacy

Anonymising data by removing specific user identifying information but leaving in unique identifiers does not work to assuage privacy concerns. This is because often clues are in the data, or in linkages between the data. AOL learned this the hard way when they released “anonymised” search data.

Furthermore, the network effect can reveal a lot about you, how many people you connect to, and how many they connect to can be a powerful identifier of you. Not to mention predict a lot of things like your career area and salary point (since more connections tends to mean richer).

For a good discussion of some of the privacy issues related to hashes see Matt Gemmell’s post, Hashing for Privacy in social apps.

Mobile apps also often send the device hardware identifier (which cannot be changed or removed) to servers and advertising networks. And I have also observed the hash of this (or the WiFi MAC address) sent through. This hardly helps accomplish anything, as anyone who knows the device ID can hash it and look for that, and anyone who knows the hash can look for it, just as with the phone numbers. This hash is equally unique to my device, and unable to be changed.

Hashing Does not equal Secrecy

As discussed under “cooking some hash(es)” it is possible to work back from a hash to the input since we know some of the constraints operating upon phone numbers. Furthermore, even if we are not sure exactly how you are hashing data then we can simply put test data in and look for known hashes of it. If I know what 123456789 hashes to and I see it in the output, then I know how your app is hashing phone numbers.

The Full Solution to Privacy and Secrecy: Salt

Both of these issues can be greatly helped by increasing the complexity of the input into the hash function. This can both remove the tendency for anonymised data to carry identical identifiers across instances, and also reduce the chance of it becoming feasible to reverse-calculate all possible values. Unfortunately there is no perfect solution to this if user-matching functionality comes first.

The correct solution as it should be used to store passwords, entry specific salting (for example with bcrypt),  is not feasible for a matching algorithm as it will only work for comparing hashed input to stored hashes, and it will not work for comparing stored hashes to stored hashes.

However, if you as a developer are determined to make a server side matching service for your users, then you need to apply a hybrid approach. This is not good practice for highly sensitive information, but it should retain the functionality needed for server side matching.

Your first privacy step is to make sure your hashes do not match those collected or used by anyone else, do this by adding some constant secret to them, a process called salting.

e.g., adding 9835476579080945368095468905486 to the start of every number before you hash

This will make all of your hashes different to those used by any other developer, but will still compare them properly. The same input will give the same output.

However, there is still a problem – If your secret salt is leaked or disclosed the reversing attacks outlined earlier become possible. To avoid this, increase the complexity of input by hashing more complex data. So, rather than just hashing the phone number, hash the name, email, and phone number together. This does introduce the problem of causing hashes to disagree if any part of the input differs by misspelling, typo’s etc…

The best way to protect your user’s data from disclosure, and your reputation from damage due to a privacy breach:

  • Don’t collect or send sensitive user data or hashes in the first place – using the security principle of least privilege.
  • Ask for access in a very obvious and unambiguous way – informed consent.

Hit me/us up on twitter ( @neohapsis or @secvalve) if you have any comments or discussion. (Especially if I made an error!)

[Update] Added author byline and clarified some wording.

About these ads
  1. again
    February 15, 2012 at 6:07 pm | #1
  2. November 27, 2013 at 10:18 pm | #2

    I tend not to leave a lot of responses, however i
    did a few searching and wound up here Pass the iOS Privacy Salt –
    Hashing Does NOT Guarantee Privacy. | SecurityDreamer.
    And I do have a few questions for you if you don’t mind.
    Could it be simply me or does it look like
    a few of these comments look like they are coming from brain dead visitors? :-P And, if you are writing on additional
    places, I’d like to follow anything fresh you have to post.
    Could you make a list of all of your community pages like your twitter feed, Facebook page or linkedin

  3. November 27, 2013 at 10:30 pm | #3

    Do you mind if I quote a few of your posts as long as I
    provide credit and sources back to your website? My blog is in the exact same area
    of interest as yours and my users would genuinely benefit from a lot of the information you provide here.
    Please let me know if this okay with you. Appreciate it!

  1. No trackbacks yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


Get every new post delivered to your Inbox.

%d bloggers like this: